Bruce Fresh Finish Loss Gloss is a quick and easy way to bring new life to your Bruce pre-finished urethane hardwood floor. Bruce Fresh Finish is a low gloss urethane finish that adds shine and protects your hardwood floor from nicks and scratches.

Instructions on how to use Bruce Fresh Finish Low Gloss from Bruce:

• (1) Sweep or vacuum your hardwood floor thorougly to remove dirt and scuff marks;
• (2) Thorougly clean your hardwood floor with Bruce Hardwood & Laminate Floor Cleaner;
• (3) Vigorously shake the Bruce Fresh Finish Low Gloss container several times to thoroughly re-mix contents before opening;
• (4) Pour Bruce Fresh Finish Low Gloss into a clean flat pan, such as a paint roller tray
• (5) Apply Bruce Fresh Finish Low Gloss with a new, clean sponge mop or paint pad. The applicator, even if new, should be thoroughly rinsed before use, as contamination may affect results;
• (6) Dip the applicator into the flat pan and gently remove excess liquid to minimize applying too much product onto the floor. Spread a thin layer with the applicator in the direction of the wood grain. We recommend applying Bruce Fresh Finish Low Gloss in small areas, 3-4 floor boards wide, moving down the length of the floor. Repeat this pattern until the entire floor has been coated. It is important that the entire floor be coated to insure a consistent appearance of the floor;
• (7) Avoid applying heavy coats of Bruce Fresh Finish Low Gloss. Instead, apply two thin coats if necessary. Be sure to allow proper dry time between coats;
• (8) Allow to dry for one hour (longer in humid areas) before applying additional coats. Light traffic is permitted within 2-3 hours. Wait 24 hours before heavy traffic or furniture replacement; and
• (9) Destroy excess materials; do not return to container or retain product for future use.

WARNINGS:

• (i) Bruce Fresh Finish Low Gloss should be used only on pre-finished urethane hardwood floors. It is NOT intended for use on hardwood floors that have been waxed with paste wax or acrylic waxes or maintained with oils or oil based products.
• (ii) Do not use Bruce Fresh Finish Low Gloss more than 3-4 times per year to avoid build-up.
• (iii) Do not clean with chemical cleaners for 2 weeks following application.
• (iv) This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.

For more information, please visit:Bruce Hardwood Flooring Care Products and Maintenance.